#
# Copyright (c) 2009-Present, Redis Ltd.
# All rights reserved.
#
# Copyright (c) 2024-present, Valkey contributors.
# All rights reserved.
#
# Licensed under your choice of (a) the Redis Source Available License 2.0
# (RSALv2); or (b) the Server Side Public License v1 (SSPLv1); or (c) the
# GNU Affero General Public License v3 (AGPLv3).
#
# Portions of this file are available under BSD3 terms; see REDISCONTRIBUTIONS for more information.
#

proc test_memory_efficiency {range} {
    r flushall
    set rd [redis_deferring_client]
    set base_mem [s used_memory]
    set written 0
    for {set j 0} {$j < 10000} {incr j} {
        set key key:$j
        set val [string repeat A [expr {int(rand()*$range)}]]
        $rd set $key $val
        incr written [string length $key]
        incr written [string length $val]
        incr written 2 ;# A separator is the minimum to store key-value data.
    }
    for {set j 0} {$j < 10000} {incr j} {
        $rd read ; # Discard replies
    }

    set current_mem [s used_memory]
    set used [expr {$current_mem-$base_mem}]
    set efficiency [expr {double($written)/$used}]
    return $efficiency
}

start_server {tags {"memefficiency external:skip"}} {
    foreach {size_range expected_min_efficiency} {
        32    0.15
        64    0.25
        128   0.35
        1024  0.75
        16384 0.82
    } {
        test "Memory efficiency with values in range $size_range" {
            set efficiency [test_memory_efficiency $size_range]
            assert {$efficiency >= $expected_min_efficiency}
        }
    }
}

run_solo {defrag} {
    proc wait_for_defrag_stop {maxtries delay {expect_frag 0}} {
        wait_for_condition $maxtries $delay {
            [s active_defrag_running] eq 0 && ($expect_frag == 0 || [s allocator_frag_ratio] <= $expect_frag)
        } else {
            after 120 ;# serverCron only updates the info once in 100ms
            puts [r info memory]
            puts [r info stats]
            puts [r memory malloc-stats]
            if {$expect_frag != 0} {
                fail "defrag didn't stop or failed to achieve expected frag ratio ([s allocator_frag_ratio] > $expect_frag)"
            } else {
                fail "defrag didn't stop."
            }
        }
    }

    proc discard_replies_every {rd count frequency discard_num} {
        if {$count % $frequency == 0} {
            for {set k 0} {$k < $discard_num} {incr k} {
                $rd read ; # Discard replies
            }
        }
    }

    proc test_active_defrag {type} {

    # note: Disabling lookahead because it changes the number and order of allocations which interferes with defrag and causes tests to fail
    r config set lookahead 1

    r debug reply-copy-avoidance 0 ;# Disable copy avoidance because it affects memory usage

    if {[string match {*jemalloc*} [s mem_allocator]] && [r debug mallctl arenas.page] <= 8192} {
        test "Active defrag main dictionary: $type" {
            r config set hz 100
            r config set activedefrag no
            r config set active-defrag-threshold-lower 5
            r config set active-defrag-cycle-min 65
            r config set active-defrag-cycle-max 75
            r config set active-defrag-ignore-bytes 2mb
            r config set maxmemory 100mb
            r config set maxmemory-policy allkeys-lru

            populate 700000 asdf1 150
            populate 100 asdf1 150 0 false 1000
            populate 170000 asdf2 300
            populate 100 asdf2 300 0 false 1000

            assert {[scan [regexp -inline {expires\=([\d]*)} [r info keyspace]] expires=%d] > 0}
            after 120 ;# serverCron only updates the info once in 100ms
            set frag [s allocator_frag_ratio]
            if {$::verbose} {
                puts "frag $frag"
            }
            assert {$frag >= 1.4}

            r config set latency-monitor-threshold 5
            r latency reset
            r config set maxmemory 110mb ;# prevent further eviction (not to fail the digest test)
            set digest [debug_digest]
            catch {r config set activedefrag yes} e
            if {[r config get activedefrag] eq "activedefrag yes"} {
                # Wait for the active defrag to start working (decision once a
                # second).
                wait_for_condition 50 100 {
                    [s total_active_defrag_time] ne 0
                } else {
                    after 120 ;# serverCron only updates the info once in 100ms
                    puts [r info memory]
                    puts [r info stats]
                    puts [r memory malloc-stats]
                    fail "defrag not started."
                }

                # This test usually runs for a while, during this interval, we test the range.
                assert_range [s active_defrag_running] 65 75
                r config set active-defrag-cycle-min 1
                r config set active-defrag-cycle-max 1
                after 120 ;# serverCron only updates the info once in 100ms
                assert_range [s active_defrag_running] 1 1
                r config set active-defrag-cycle-min 65
                r config set active-defrag-cycle-max 75

                # Wait for the active defrag to stop working.
                wait_for_defrag_stop 2000 100 1.1

                # Test the fragmentation is lower.
                after 120 ;# serverCron only updates the info once in 100ms
                set frag [s allocator_frag_ratio]
                set max_latency 0
                foreach event [r latency latest] {
                    lassign $event eventname time latency max
                    if {$eventname == "active-defrag-cycle"} {
                        set max_latency $max
                    }
                }
                if {$::verbose} {
                    puts "frag $frag"
                    set misses [s active_defrag_misses]
                    set hits [s active_defrag_hits]
                    puts "hits: $hits"
                    puts "misses: $misses"
                    puts "max latency $max_latency"
                    puts [r latency latest]
                    puts [r latency history active-defrag-cycle]
                }
                # due to high fragmentation, 100hz, and active-defrag-cycle-max set to 75,
                # we expect max latency to be not much higher than 7.5ms but due to rare slowness threshold is set higher
                if {!$::no_latency} {
                    assert {$max_latency <= 30}
                }
            }
            # verify the data isn't corrupted or changed
            set newdigest [debug_digest]
            assert {$digest eq $newdigest}
            r save ;# saving an rdb iterates over all the data / pointers

            # if defrag is supported, test AOF loading too
            if {[r config get activedefrag] eq "activedefrag yes" && $type eq "standalone"} {
            test "Active defrag - AOF loading" {
                # reset stats and load the AOF file
                r config resetstat
                r config set key-load-delay -25 ;# sleep on average 1/25 usec
                # Note: This test is checking if defrag is working DURING AOF loading (while
                #       timers are not active).  So we don't give any extra time, and we deactivate
                #       defrag immediately after the AOF loading is complete.  During loading,
                #       defrag will get invoked less often, causing starvation prevention.  We
                #       should expect longer latency measurements.
                r debug loadaof
                r config set activedefrag no
                # measure hits and misses right after aof loading
                set misses [s active_defrag_misses]
                set hits [s active_defrag_hits]

                after 120 ;# serverCron only updates the info once in 100ms
                set frag [s allocator_frag_ratio]
                set max_latency 0
                foreach event [r latency latest] {
                    lassign $event eventname time latency max
                    if {$eventname == "while-blocked-cron"} {
                        set max_latency $max
                    }
                }
                if {$::verbose} {
                    puts "AOF loading:"
                    puts "frag $frag"
                    puts "hits: $hits"
                    puts "misses: $misses"
                    puts "max latency $max_latency"
                    puts [r latency latest]
                    puts [r latency history "while-blocked-cron"]
                }
                # make sure we had defrag hits during AOF loading
                assert {$hits > 100000}
                # make sure the defragger did enough work to keep the fragmentation low during loading.
                # we cannot check that it went all the way down, since we don't wait for full defrag cycle to complete.
                assert {$frag < 1.4}
                # since the AOF contains simple (fast) SET commands (and the cron during loading runs every 1024 commands),
                # it'll still not block the loading for long periods of time.
                if {!$::no_latency} {
                    assert {$max_latency <= 40}
                }
            }
            } ;# Active defrag - AOF loading
        }
        r config set appendonly no
        r config set key-load-delay 0

        test "Active defrag eval scripts: $type" {
            r flushdb
            r script flush sync
            r config set hz 100
            r config set activedefrag no
            wait_for_defrag_stop 500 100
            r config resetstat
            r config set active-defrag-threshold-lower 5
            r config set active-defrag-cycle-min 65
            r config set active-defrag-cycle-max 75
            r config set active-defrag-ignore-bytes 1500kb
            r config set maxmemory 0

            set n 50000

            # Populate memory with interleaving script-key pattern of same size
            set dummy_script "--[string repeat x 400]\nreturn "
            set rd [redis_deferring_client]
            # Send commands in batches and read responses to avoid TCP deadlock.
            # Without interleaving reads, TCP congestion control can throttle
            # the connection when buffers fill, causing the test to hang.
            set batch_size 1000
            for {set j 0} {$j < $n} {incr j} {
                set val "$dummy_script[format "%06d" $j]"
                $rd script load $val
                $rd set k$j $val
                if {($j + 1) % $batch_size == 0} {
                    for {set i 0} {$i < $batch_size} {incr i} {
                        $rd read ; # Discard script load replies
                        $rd read ; # Discard set replies
                    }
                }
            }
            # Read remaining responses
            set remaining [expr {$n % $batch_size}]
            for {set j 0} {$j < $remaining} {incr j} {
                $rd read ; # Discard script load replies
                $rd read ; # Discard set replies
            }
            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_lessthan [s allocator_frag_ratio] 1.05

            # Delete all the keys to create fragmentation
            # Use same batching pattern to avoid TCP deadlock
            for {set j 0} {$j < $n} {incr j} {
                $rd del k$j
                if {($j + 1) % $batch_size == 0} {
                    for {set i 0} {$i < $batch_size} {incr i} {
                        $rd read
                    }
                }
            }
            set remaining [expr {$n % $batch_size}]
            for {set j 0} {$j < $remaining} {incr j} { $rd read }
            if {$type eq "cluster"} {
                $rd config resetstat
                $rd read ; # Discard config resetstat reply
            }
            $rd close
            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_morethan [s allocator_frag_ratio] 1.4

            catch {r config set activedefrag yes} e
            if {[r config get activedefrag] eq "activedefrag yes"} {
            
                # wait for the active defrag to start working (decision once a second)
                wait_for_condition 50 100 {
                    [s total_active_defrag_time] ne 0
                } else {
                    after 120 ;# serverCron only updates the info once in 100ms
                    puts [r info memory]
                    puts [r info stats]
                    puts [r memory malloc-stats]
                    fail "defrag not started."
                }

                # wait for the active defrag to stop working
                wait_for_defrag_stop 500 100 1.05

                # test the fragmentation is lower
                after 120 ;# serverCron only updates the info once in 100ms
                if {$::verbose} {
                    puts "used [s allocator_allocated]"
                    puts "rss [s allocator_active]"
                    puts "frag [s allocator_frag_ratio]"
                    puts "frag_bytes [s allocator_frag_bytes]"
                }
            }
            # Flush all script to make sure we don't crash after defragging them
            r script flush sync
        } {OK}

        test "Active defrag big keys: $type" {
            r flushdb
            r config set hz 100
            r config set activedefrag no
            wait_for_defrag_stop 500 100
            r config resetstat
            r config set active-defrag-max-scan-fields 1000
            r config set active-defrag-threshold-lower 5
            r config set active-defrag-cycle-min 65
            r config set active-defrag-cycle-max 75
            r config set active-defrag-ignore-bytes 2mb
            r config set maxmemory 0
            r config set list-max-ziplist-size 5 ;# list of 10k items will have 2000 quicklist nodes
            r config set stream-node-max-entries 5
            r config set hash-max-listpack-entries 10
            r hmset hash_lp h1 v1 h2 v2 h3 v3
            assert_encoding listpack hash_lp
            r hmset hash_ht h1 v1 h2 v2 h3 v3 h4 v4 h5 v5 h6 v6 h7 v7 h8 v8 h9 v9 h10 v10 h11 v11
            assert_encoding hashtable hash_ht
            r lpush list a b c d
            r zadd zset 0 a 1 b 2 c 3 d
            r sadd set a b c d
            r xadd stream * item 1 value a
            r xadd stream * item 2 value b
            r xgroup create stream mygroup 0
            r xreadgroup GROUP mygroup Alice COUNT 1 STREAMS stream >

            # create big keys with 10k items
            # Use batching to avoid TCP deadlock
            set rd [redis_deferring_client]
            set batch_size 1000
            for {set j 0} {$j < 10000} {incr j} {
                $rd hset bighash $j [concat "asdfasdfasdf" $j]
                $rd lpush biglist [concat "asdfasdfasdf" $j]
                $rd zadd bigzset $j [concat "asdfasdfasdf" $j]
                $rd sadd bigset [concat "asdfasdfasdf" $j]
                $rd xadd bigstream * item 1 value a
                if {($j + 1) % $batch_size == 0} {
                    for {set i 0} {$i < [expr {$batch_size * 5}]} {incr i} {
                        $rd read
                    }
                }
            }
            # Read remaining replies
            set remaining [expr {(10000 % $batch_size) * 5}]
            for {set j 0} {$j < $remaining} {incr j} {
                $rd read
            }

            # create some small items (effective in cluster-enabled)
            r set "{bighash}smallitem" val
            r set "{biglist}smallitem" val
            r set "{bigzset}smallitem" val
            r set "{bigset}smallitem" val
            r set "{bigstream}smallitem" val


            set expected_frag 1.49
            if {$::accurate} {
                # scale the hash to 1m fields in order to have a measurable the latency
                set count 0
                for {set j 10000} {$j < 1000000} {incr j} {
                    $rd hset bighash $j [concat "asdfasdfasdf" $j]

                    incr count
                    discard_replies_every $rd $count 10000 10000
                }
                # creating that big hash, increased used_memory, so the relative frag goes down
                set expected_frag 1.3
            }

            # add a mass of string keys
            set count 0
            for {set j 0} {$j < 500000} {incr j} {
                $rd setrange $j 150 a

                incr count
                discard_replies_every $rd $count 10000 10000
            }
            assert_equal [r dbsize] 500016

            # create some fragmentation
            set count 0
            for {set j 0} {$j < 500000} {incr j 2} {
                $rd del $j

                incr count
                discard_replies_every $rd $count 10000 10000
            }
            assert_equal [r dbsize] 250016

            # start defrag
            after 120 ;# serverCron only updates the info once in 100ms
            set frag [s allocator_frag_ratio]
            if {$::verbose} {
                puts "frag $frag"
            }
            assert {$frag >= $expected_frag}
            r config set latency-monitor-threshold 5
            r latency reset

            set digest [debug_digest]
            catch {r config set activedefrag yes} e
            if {[r config get activedefrag] eq "activedefrag yes"} {
                # wait for the active defrag to start working (decision once a second)
                wait_for_condition 50 100 {
                    [s total_active_defrag_time] ne 0
                } else {
                    after 120 ;# serverCron only updates the info once in 100ms
                    puts [r info memory]
                    puts [r info stats]
                    puts [r memory malloc-stats]
                    fail "defrag not started."
                }

                # wait for the active defrag to stop working
                wait_for_defrag_stop 500 100 1.1

                # test the fragmentation is lower
                after 120 ;# serverCron only updates the info once in 100ms
                set frag [s allocator_frag_ratio]
                set max_latency 0
                foreach event [r latency latest] {
                    lassign $event eventname time latency max
                    if {$eventname == "active-defrag-cycle"} {
                        set max_latency $max
                    }
                }
                if {$::verbose} {
                    puts "frag $frag"
                    set misses [s active_defrag_misses]
                    set hits [s active_defrag_hits]
                    puts "hits: $hits"
                    puts "misses: $misses"
                    puts "max latency $max_latency"
                    puts [r latency latest]
                    puts [r latency history active-defrag-cycle]
                }
                # due to high fragmentation, 100hz, and active-defrag-cycle-max set to 75,
                # we expect max latency to be not much higher than 7.5ms but due to rare slowness threshold is set higher
                if {!$::no_latency} {
                    assert {$max_latency <= 30}
                }
            }
            # verify the data isn't corrupted or changed
            set newdigest [debug_digest]
            assert {$digest eq $newdigest}
            r save ;# saving an rdb iterates over all the data / pointers
        } {OK}

        test "Active defrag pubsub: $type" {
            r flushdb
            r config set hz 100
            r config set activedefrag no
            wait_for_defrag_stop 500 100
            r config resetstat
            r config set active-defrag-threshold-lower 5
            r config set active-defrag-cycle-min 65
            r config set active-defrag-cycle-max 75
            r config set active-defrag-ignore-bytes 1500kb
            r config set maxmemory 0

            # Populate memory with interleaving pubsub-key pattern of same size
            set n 50000
            set dummy_channel "[string repeat x 400]"
            set rd [redis_deferring_client]
            set rd_pubsub [redis_deferring_client]
            for {set j 0} {$j < $n} {incr j} {
                set channel_name "$dummy_channel[format "%06d" $j]"
                $rd_pubsub subscribe $channel_name
                $rd_pubsub read ; # Discard subscribe replies
                $rd_pubsub ssubscribe $channel_name
                $rd_pubsub read ; # Discard ssubscribe replies
                # Pub/Sub clients are handled in the main thread, so their memory is
                # allocated there. Using the SETBIT command avoids the main thread
                # referencing argv from IO threads.
                $rd setbit k$j [expr {[string length $channel_name] * 8}] 1
                $rd read ; # Discard set replies
            }

            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_lessthan [s allocator_frag_ratio] 1.05

            # Delete all the keys to create fragmentation
            # Use batching to avoid TCP deadlock
            set batch_size 1000
            for {set j 0} {$j < $n} {incr j} {
                $rd del k$j
                if {($j + 1) % $batch_size == 0} {
                    for {set i 0} {$i < $batch_size} {incr i} {
                        $rd read
                    }
                }
            }
            set remaining [expr {$n % $batch_size}]
            for {set j 0} {$j < $remaining} {incr j} { $rd read }
            if {$type eq "cluster"} {
                $rd config resetstat
                $rd read ; # Discard config resetstat reply
            }
            $rd close
            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_morethan [s allocator_frag_ratio] 1.35

            catch {r config set activedefrag yes} e
            if {[r config get activedefrag] eq "activedefrag yes"} {
            
                # wait for the active defrag to start working (decision once a second)
                wait_for_condition 50 100 {
                    [s total_active_defrag_time] ne 0
                } else {
                    after 120 ;# serverCron only updates the info once in 100ms
                    puts [r info memory]
                    puts [r info stats]
                    puts [r memory malloc-stats]
                    fail "defrag not started."
                }

                # wait for the active defrag to stop working
                wait_for_defrag_stop 500 100 1.05

                # test the fragmentation is lower
                after 120 ;# serverCron only updates the info once in 100ms
                if {$::verbose} {
                    puts "used [s allocator_allocated]"
                    puts "rss [s allocator_active]"
                    puts "frag [s allocator_frag_ratio]"
                    puts "frag_bytes [s allocator_frag_bytes]"
                }
            }

            # Publishes some message to all the pubsub clients to make sure that
            # we didn't break the data structure.
            for {set j 0} {$j < $n} {incr j} {
                set channel "$dummy_channel[format "%06d" $j]"
                r publish $channel "hello"
                assert_equal "message $channel hello" [$rd_pubsub read] 
                $rd_pubsub unsubscribe $channel
                $rd_pubsub read
                r spublish $channel "hello"
                assert_equal "smessage $channel hello" [$rd_pubsub read] 
                $rd_pubsub sunsubscribe $channel
                $rd_pubsub read
            }
            $rd_pubsub close
        }

        test "Active defrag IDMP streams: $type" {
            r flushdb
            r config set hz 100
            r config set activedefrag no
            wait_for_defrag_stop 500 100
            r config resetstat
            r config set active-defrag-threshold-lower 5
            r config set active-defrag-cycle-min 65
            r config set active-defrag-cycle-max 75
            r config set active-defrag-ignore-bytes 1500kb
            r config set maxmemory 0

            set n 50000

            # Create the stream first and configure IDMP limits
            r xadd idmpstream * dummy value
            r xcfgset idmpstream idmp-maxsize 10000 ;# Allow 10000 entries per producer

            # Populate memory with interleaving IDMP stream-key pattern of same size
            set dummy_iid "[string repeat x 400]"
            set rd [redis_deferring_client]
            for {set j 0} {$j < $n} {incr j} {
                set producer_id "producer[expr {$j % 10}]"
                set iid "$dummy_iid[format "%06d" $j]"
                $rd xadd idmpstream IDMP $producer_id $iid * field value
                $rd set k$j $iid
            }
            for {set j 0} {$j < [expr {$n * 2}]} {incr j} {
                $rd read ; # Discard replies
            }
            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_lessthan [s allocator_frag_ratio] 1.05

                # Verify IDMP structures were created
            set idmp_info [r xinfo stream idmpstream full]
            set num_producers [dict get $idmp_info pids-tracked]
            set num_entries [dict get $idmp_info iids-tracked]
            assert {$num_producers == 10}
            assert {$num_entries == $n}

            # Delete all the keys to create fragmentation
            for {set j 0} {$j < $n} {incr j} { $rd del k$j }
            for {set j 0} {$j < $n} {incr j} { $rd read } ; # Discard del replies
            if {$type eq "cluster"} {
                $rd config resetstat
                $rd read ; # Discard config resetstat reply
            }
            $rd close
            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_morethan [s allocator_frag_ratio] 1.35

            catch {r config set activedefrag yes} e
            if {[r config get activedefrag] eq "activedefrag yes"} {
            
                # wait for the active defrag to start working (decision once a second)
                wait_for_condition 50 100 {
                    [s total_active_defrag_time] ne 0
                } else {
                    after 120 ;# serverCron only updates the info once in 100ms
                    puts [r info memory]
                    puts [r info stats]
                    puts [r memory malloc-stats]
                    fail "defrag not started."
                }

                # wait for the active defrag to stop working
                wait_for_defrag_stop 500 100 1.1

                # test the fragmentation is lower
                after 120 ;# serverCron only updates the info once in 100ms
                if {$::verbose} {
                    puts "used [s allocator_allocated]"
                    puts "rss [s allocator_active]"
                    puts "frag [s allocator_frag_ratio]"
                    puts "frag_bytes [s allocator_frag_bytes]"
                }

                # Verify IDMP structures are intact after defrag
                set idmp_info_after [r xinfo stream idmpstream full]
                set num_producers_after [dict get $idmp_info_after pids-tracked]
                set num_entries_after [dict get $idmp_info_after iids-tracked]
                assert {$num_producers_after == 10}
                assert {$num_entries_after == $n}

                # Verify IDMP deduplication still works after defrag
                set original_length [r xlen idmpstream]
                r xadd idmpstream IDMP producer0 "${dummy_iid}000000" * field newvalue
                set new_length [r xlen idmpstream]
                assert {$new_length == $original_length}
            }
        }

        foreach {eb_container fields n} {eblist 16 3000 ebrax 30 1600 large_ebrax 500 100} {
        test "Active Defrag HFE with $eb_container: $type" {
            r flushdb
            r config set hz 100
            r config set activedefrag no
            wait_for_defrag_stop 500 100
            r config resetstat
            r config set active-defrag-threshold-lower 7
            r config set active-defrag-cycle-min 65
            r config set active-defrag-cycle-max 75
            r config set active-defrag-ignore-bytes 1000kb
            r config set maxmemory 0
            r config set hash-max-listpack-value 512
            r config set hash-max-listpack-entries 10

            # Populate memory with interleaving hash field of same size
            # Interleave reads to avoid TCP deadlock
            set dummy_field "[string repeat x 400]"
            set rd [redis_deferring_client]
            for {set i 0} {$i < $n} {incr i} {
                for {set j 0} {$j < $fields} {incr j} {
                    $rd hset h$i $dummy_field$j v
                    $rd hexpire h$i 9999999 FIELDS 1 $dummy_field$j
                    $rd hset k$i $dummy_field$j v
                    $rd hexpire k$i 9999999 FIELDS 1 $dummy_field$j
                }
                $rd expire h$i 9999999 ;# Ensure expire is updated after kvobj reallocation
                # Read replies for this iteration to avoid TCP deadlock
                for {set j 0} {$j < $fields} {incr j} {
                    $rd read ; # Discard hset replies
                    $rd read ; # Discard hexpire replies
                    $rd read ; # Discard hset replies
                    $rd read ; # Discard hexpire replies
                }
                $rd read ; # Discard expire replies
            }

            # Coverage for listpackex.
            r hset h_lpex $dummy_field v
            r hexpire h_lpex 9999999 FIELDS 1 $dummy_field
            assert_encoding listpackex h_lpex

            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_lessthan [s allocator_frag_ratio] 1.07

            # Delete all the keys to create fragmentation
            for {set i 0} {$i < $n} {incr i} {
                r del k$i
            }
            $rd close
            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_morethan [s allocator_frag_ratio] 1.35

            catch {r config set activedefrag yes} e
            if {[r config get activedefrag] eq "activedefrag yes"} {
            
                # wait for the active defrag to start working (decision once a second)
                wait_for_condition 50 100 {
                    [s total_active_defrag_time] ne 0
                } else {
                    after 120 ;# serverCron only updates the info once in 100ms
                    puts [r info memory]
                    puts [r info stats]
                    puts [r memory malloc-stats]
                    fail "defrag not started."
                }

                # wait for the active defrag to stop working
                wait_for_defrag_stop 500 100 1.07

                # test the fragmentation is lower
                after 120 ;# serverCron only updates the info once in 100ms
                if {$::verbose} {
                    puts "used [s allocator_allocated]"
                    puts "rss [s allocator_active]"
                    puts "frag [s allocator_frag_ratio]"
                    puts "frag_bytes [s allocator_frag_bytes]"
                }
            }
        }
        } ;# end of foreach

        test "Active defrag for argv retained by the main thread from IO thread: $type" {
            r flushdb
            r config set hz 100
            r config set activedefrag no
            wait_for_defrag_stop 500 100
            r config resetstat
            set io_threads [lindex [r config get io-threads] 1]
            if {$io_threads == 1} {
                r config set active-defrag-threshold-lower 5
            } else {
                r config set active-defrag-threshold-lower 10
            }
            r config set active-defrag-cycle-min 65
            r config set active-defrag-cycle-max 75
            r config set active-defrag-ignore-bytes 1000kb
            r config set maxmemory 0

            # Create some clients so that they are distributed among different io threads.
            set clients {}
            for {set i 0} {$i < 8} {incr i} {
                lappend clients [redis_client]
            }

            # Populate memory with interleaving key pattern of same size
            set dummy "[string repeat x 400]"
            set n 10000
            for {set i 0} {$i < [llength $clients]} {incr i} {
                set rr [lindex $clients $i]
                for {set j 0} {$j < $n} {incr j} {
                    $rr set "k$i-$j" $dummy
                }
            }

            # If io-threads is enable, verify that memory allocation is not from the main thread.
            if {$io_threads != 1} {
                # At least make sure that bin 448 is created in the main thread's arena.
                r set k dummy
                r del k

                # We created 10000 string keys of 400 bytes each for each client, so when the memory
                # allocation for the 448 bin in the main thread is significantly smaller than this,
                # we can conclude that the memory allocation is not coming from it.
                set malloc_stats [r memory malloc-stats]
                if {[regexp {(?s)arenas\[0\]:.*?448[ ]+[\d]+[ ]+([\d]+)[ ]} $malloc_stats - allocated]} {
                    # Ensure the allocation for bin 448 in the main thread’s arena
                    # is far less than 4375k (10000 * 448 bytes).
                    assert_lessthan $allocated 200000
                } else {
                    fail "Failed to get the main thread's malloc stats."
                }
            }

            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_lessthan [s allocator_frag_ratio] 1.05

            # Delete keys with even indices to create fragmentation.
            for {set i 0} {$i < [llength $clients]} {incr i} {
                set rd [lindex $clients $i]
                for {set j 0} {$j < $n} {incr j 2} {
                    $rd del "k$i-$j"
                }
            }
            for {set i 0} {$i < [llength $clients]} {incr i} {
                [lindex $clients $i] close
            }
            if {$type eq "cluster"} {
                r config resetstat
            }

            after 120 ;# serverCron only updates the info once in 100ms
            if {$::verbose} {
                puts "used [s allocator_allocated]"
                puts "rss [s allocator_active]"
                puts "frag [s allocator_frag_ratio]"
                puts "frag_bytes [s allocator_frag_bytes]"
            }
            assert_morethan [s allocator_frag_ratio] 1.35

            catch {r config set activedefrag yes} e
            if {[r config get activedefrag] eq "activedefrag yes"} {
            
                # wait for the active defrag to start working (decision once a second)
                wait_for_condition 50 100 {
                    [s total_active_defrag_time] ne 0
                } else {
                    after 120 ;# serverCron only updates the info once in 100ms
                    puts [r info memory]
                    puts [r info stats]
                    puts [r memory malloc-stats]
                    fail "defrag not started."
                }

                # wait for the active defrag to stop working
                if {$io_threads == 1} {
                    wait_for_defrag_stop 500 100 1.05
                } else {
                    # TODO: When multithreading is enabled, argv may be created in the io thread
                    # and kept in the main thread, which can cause fragmentation to become worse.
                    wait_for_defrag_stop 500 100 1.1
                }

                # test the fragmentation is lower
                after 120 ;# serverCron only updates the info once in 100ms
                if {$::verbose} {
                    puts "used [s allocator_allocated]"
                    puts "rss [s allocator_active]"
                    puts "frag [s allocator_frag_ratio]"
                    puts "frag_bytes [s allocator_frag_bytes]"
                }
            }
        }

        if {$type eq "standalone"} { ;# skip in cluster mode
        test "Active defrag big list: $type" {
            r flushdb
            r config set hz 100
            r config set activedefrag no
            wait_for_defrag_stop 500 100
            r config resetstat
            r config set active-defrag-max-scan-fields 1000
            r config set active-defrag-threshold-lower 5
            r config set active-defrag-cycle-min 65
            r config set active-defrag-cycle-max 75
            r config set active-defrag-ignore-bytes 2mb
            r config set maxmemory 0
            r config set list-max-ziplist-size 1 ;# list of 100k items will have 100k quicklist nodes

            # create big keys with 10k items
            set rd [redis_deferring_client]

            set expected_frag 1.5
            # add a mass of list nodes to two lists (allocations are interlaced)
            set val [string repeat A 500] ;# 1 item of 500 bytes puts us in the 640 bytes bin, which has 32 regs, so high potential for fragmentation
            set elements 100000
            set count 0
            for {set j 0} {$j < $elements} {incr j} {
                $rd lpush biglist1 $val
                $rd lpush biglist2 $val

                incr count
                discard_replies_every $rd $count 10000 20000
            }

            # create some fragmentation
            r del biglist2

            # start defrag
            after 120 ;# serverCron only updates the info once in 100ms
            set frag [s allocator_frag_ratio]
            if {$::verbose} {
                puts "frag $frag"
            }

            assert {$frag >= $expected_frag}
            r config set latency-monitor-threshold 5
            r latency reset

            set digest [debug_digest]
            catch {r config set activedefrag yes} e
            if {[r config get activedefrag] eq "activedefrag yes"} {
                # wait for the active defrag to start working (decision once a second)
                wait_for_condition 50 100 {
                    [s total_active_defrag_time] ne 0
                } else {
                    after 120 ;# serverCron only updates the info once in 100ms
                    puts [r info memory]
                    puts [r info stats]
                    puts [r memory malloc-stats]
                    fail "defrag not started."
                }

                # wait for the active defrag to stop working
                wait_for_defrag_stop 500 100 1.1

                # test the fragmentation is lower
                after 120 ;# serverCron only updates the info once in 100ms
                set misses [s active_defrag_misses]
                set hits [s active_defrag_hits]
                set frag [s allocator_frag_ratio]
                set max_latency 0
                foreach event [r latency latest] {
                    lassign $event eventname time latency max
                    if {$eventname == "active-defrag-cycle"} {
                        set max_latency $max
                    }
                }
                if {$::verbose} {
                    puts "used [s allocator_allocated]"
                    puts "rss [s allocator_active]"
                    puts "frag_bytes [s allocator_frag_bytes]"
                    puts "frag $frag"
                    puts "misses: $misses"
                    puts "hits: $hits"
                    puts "max latency $max_latency"
                    puts [r latency latest]
                    puts [r latency history active-defrag-cycle]
                    puts [r memory malloc-stats]
                }
                # due to high fragmentation, 100hz, and active-defrag-cycle-max set to 75,
                # we expect max latency to be not much higher than 7.5ms but due to rare slowness threshold is set higher
                if {!$::no_latency} {
                    assert {$max_latency <= 30}
                }

                # in extreme cases of stagnation, we see over 5m misses before the tests aborts with "defrag didn't stop",
                # in normal cases we only see 100k misses out of 100k elements
                assert {$misses < $elements * 2}
            }
            # verify the data isn't corrupted or changed
            set newdigest [debug_digest]
            assert {$digest eq $newdigest}
            r save ;# saving an rdb iterates over all the data / pointers
            r del biglist1 ;# coverage for quicklistBookmarksClear
        } {1}

        test "Active defrag edge case: $type" {
            # there was an edge case in defrag where all the slabs of a certain bin are exact the same
            # % utilization, with the exception of the current slab from which new allocations are made
            # if the current slab is lower in utilization the defragger would have ended up in stagnation,
            # kept running and not move any allocation.
            # this test is more consistent on a fresh server with no history
            start_server {tags {"defrag"} overrides {save ""}} {
                r flushdb
                r config set hz 100
                r config set activedefrag no
                wait_for_defrag_stop 500 100
                r config resetstat
                r config set active-defrag-max-scan-fields 1000
                r config set active-defrag-threshold-lower 5
                r config set active-defrag-cycle-min 65
                r config set active-defrag-cycle-max 75
                r config set active-defrag-ignore-bytes 1mb
                r config set maxmemory 0
                set expected_frag 1.3

                r debug mallctl-str thread.tcache.flush VOID
                # fill the first slab containing 32 regs of 640 bytes.
                for {set j 0} {$j < 32} {incr j} {
                    r setrange "_$j" 600 x
                    r debug mallctl-str thread.tcache.flush VOID
                }

                # add a mass of keys with 600 bytes values, fill the bin of 640 bytes which has 32 regs per slab.
                set rd [redis_deferring_client]
                set keys 640000
                set count 0
                for {set j 0} {$j < $keys} {incr j} {
                    $rd setrange $j 600 x

                    incr count
                    discard_replies_every $rd $count 10000 10000
                }

                # create some fragmentation of 50%
                set sent 0
                for {set j 0} {$j < $keys} {incr j 1} {
                    $rd del $j
                    incr sent
                    incr j 1

                    discard_replies_every $rd $sent 10000 10000
                }

                # create higher fragmentation in the first slab
                for {set j 10} {$j < 32} {incr j} {
                    r del "_$j"
                }

                # start defrag
                after 120 ;# serverCron only updates the info once in 100ms
                set frag [s allocator_frag_ratio]
                if {$::verbose} {
                    puts "frag $frag"
                }

                assert {$frag >= $expected_frag}

                set digest [debug_digest]
                catch {r config set activedefrag yes} e
                if {[r config get activedefrag] eq "activedefrag yes"} {
                    # wait for the active defrag to start working (decision once a second)
                    wait_for_condition 50 100 {
                        [s total_active_defrag_time] ne 0
                    } else {
                        after 120 ;# serverCron only updates the info once in 100ms
                        puts [r info memory]
                        puts [r info stats]
                        puts [r memory malloc-stats]
                        fail "defrag not started."
                    }

                    # wait for the active defrag to stop working
                    wait_for_defrag_stop 500 100 1.1

                    # test the fragmentation is lower
                    after 120 ;# serverCron only updates the info once in 100ms
                    set misses [s active_defrag_misses]
                    set hits [s active_defrag_hits]
                    set frag [s allocator_frag_ratio]
                    if {$::verbose} {
                        puts "frag $frag"
                        puts "hits: $hits"
                        puts "misses: $misses"
                    }
                    assert {$misses < 10000000} ;# when defrag doesn't stop, we have some 30m misses, when it does, we have 2m misses
                }

                # verify the data isn't corrupted or changed
                set newdigest [debug_digest]
                assert {$digest eq $newdigest}
                r save ;# saving an rdb iterates over all the data / pointers
            }
        } ;# standalone
        }
    }
    }

    test "Active defrag can't be triggered during replicaof database flush. See issue #14267" {
        start_server {tags {"repl"} overrides {save ""}} {
            set master_host [srv 0 host]
            set master_port [srv 0 port]

            start_server {overrides {save ""}} {
                set replica [srv 0 client]
                set rd [redis_deferring_client 0]

                $replica config set hz 100
                $replica config set activedefrag no
                $replica config set active-defrag-threshold-lower 5
                $replica config set active-defrag-cycle-min 65
                $replica config set active-defrag-cycle-max 75
                $replica config set active-defrag-ignore-bytes 2mb

                # add a mass of string keys
                set count 0
                for {set j 0} {$j < 500000} {incr j} {
                    $rd setrange $j 150 a

                    incr count
                    discard_replies_every $rd $count 10000 10000
                }
                assert_equal [$replica dbsize] 500000

                # create some fragmentation
                set count 0
                for {set j 0} {$j < 500000} {incr j 2} {
                    $rd del $j

                    incr count
                    discard_replies_every $rd $count 10000 10000
                }
                $rd close
                assert_equal [$replica dbsize] 250000

                catch {$replica config set activedefrag yes} e
                if {[$replica config get activedefrag] eq "activedefrag yes"} {
                    # Start replication sync which will flush the replica's database,
                    # then enable defrag to run concurrently with the database flush.
                    $replica replicaof $master_host $master_port

                    # wait for the active defrag to start working (decision once a second)
                    wait_for_condition 50 100 {
                        [s total_active_defrag_time] ne 0
                    } else {
                        after 120 ;# serverCron only updates the info once in 100ms
                        puts [$replica info memory]
                        puts [$replica info stats]
                        puts [$replica memory malloc-stats]
                        fail "defrag not started."
                    }

                    wait_for_sync $replica

                    # wait for the active defrag to stop working (db has been emptied during replication sync)
                    wait_for_defrag_stop 500 100
                    assert_equal [$replica dbsize] 0
                }
            }
        }
    } {} {defrag external:skip tsan:skip debug_defrag:skip cluster}

    start_cluster 1 0 {tags {"defrag external:skip tsan:skip debug_defrag:skip cluster needs:debug"} overrides {appendonly yes auto-aof-rewrite-percentage 0 save "" loglevel notice}} {
        test_active_defrag "cluster"
    }

    start_server {tags {"defrag external:skip tsan:skip debug_defrag:skip standalone needs:debug"} overrides {appendonly yes auto-aof-rewrite-percentage 0 save "" loglevel notice}} {
        test_active_defrag "standalone"
    }
} ;# run_solo